U.S. Combined-Cycle Plants Getting Bigger

12 February 2019

Beginning in 2014, the average size of a natural gas-fired combined-cycle power block in the U.S. has increased significantly, according to an analysis by the U.S. Energy Information Agency (EIA).

The average combined-cycle power block installed between 2002 and 2014 was about 500 MW. After 2014, power block capacity increased, reaching an average of 820 MW in 2017. Power blocks have increased in size as the performance of combined-cycle units has continued to improve, and current and projected natural gas prices and supply provide a competitive advantage for the combined-cycle technology, according to the EIA. The most common configuration involves two combustion turbines supporting one steam turbine.

Most of the installed capacity of natural gas-fired combined-cycle units comes from power blocks that have capacities of 600 MW to 700 MW. Of the 644 natural gas-fired combined-cycle power blocks installed nationwide, 16% are within this range. In 2017, two-thirds of the power blocks installed that year were 600 MW or higher, helping to drive the increase in average capacity when compared with power blocks installed in earlier years, the analysis found.

Factors such as operating cost and performance affect the sizing of a combined-cycle power block for a particular application. The heat rate of a generator, measured as the amount of BTUs required to generate a kilowatthour of electricity, is the metric most commonly used to represent the efficiency of commercial generators, according to the EIA.

The trend toward larger combined-cycle power blocks can largely be explained by the efficiency gains (lower heat rates) available from larger power blocks. For example, the capacity-weighted average heat rate of power blocks less than 500 MW is 6% higher (or less efficient) than that of power blocks larger than 1000 MW. Larger power blocks also generally have lower per-unit capital costs, making them more attractive investments, according to the EIA.

The EIA report found that smaller power blocks still play an important role in providing electricity. Generators have a minimum output level—known as minimum load—below which continued operation creates risks of instability, inefficiency, and high emissions. Smaller blocks, which inherently have lower minimum loads, are commonly associated with greater flexibility because they can operate through low demand periods without having to shut down.

POWER SOURCING GUIDE

The trusted reference and buyer’s guide for 83 years

The original “desktop search engine,” guiding nearly 10,000 users in more than 90 countries it is the primary reference for specifications and details on all the components that go into engine systems.

Visit Now

STAY CONNECTED



Receive the information you need when you need it through our world-leading magazines, newsletters and daily briefings.

Sign up

CONNECT WITH THE TEAM
Becky Schultz Vice President of Content Tel: +1 480 408 9774 E-mail: [email protected]
Julian Buckley Editor Tel: +44 (0) 1892 784088 E-mail: [email protected]
Chad Elmore Managing Editor E-mail: [email protected]
Tony Radke Vice President of Sales Tel: +1 480 478 6302 E-mail: [email protected]
Roberta Prandi Power Progress International Brand Manager Tel: +39 334 6538183 E-mail: [email protected]