Autonomous bus takes to the roads of Scotland

Passenger service expected to go live later this summer

Alexander Dennis The Alexander Dennis buses are fitted with Fusion Processing’s sensor and control technology, CAVstar, that enables them to run on pre-selected roads without the safety driver having to intervene or take control. (Photo: Fusion Processing)

What has been called the UK’s first full-sized autonomous bus took to the roads of Scotland April 25 as live testing began for project CAVForth.

Stagecoach, one of Britain’s leading public transport businesses, in partnership with Fusion Processing, Alexander Dennis and Transport Scotland, will carry out on-road testing (sans passengers) of an autonomous bus for two weeks in preparation for the launch of the CAVForth pilot service in late summer.

The Project CAVForth pilot, which is jointly funded by the UK Government’s Centre for Connected and Autonomous Vehicles (CCAV) will eventually see five single-deck autonomous Alexander Dennis buses operating at SAE Level 4.

The buses are fitted with Fusion Processing’s sensor and control technology, CAVstar, that enables them to run on pre-selected roads without the safety driver having to intervene or take control. The buses will provide a service capable of carrying up to 36 passengers over the 14 miles across the bridge, with capacity for over 10,000 passengers a week.

The on-road testing in Scotland follows successful depot-based trials, track testing and virtual simulation where the buses have been put through their paces to fine tune the autonomous drive systems.

To help support the delivery of Project CAVForth, Transport Scotland recently opened a section of Actively Managed Hard Shoulder for all buses on the M8 eastbound. It will help to reduce journey times and improve journey time reliability for all buses of 24 seats or more on approach to Edinburgh, Scotland.

As part of project CAVForth, around 500 members of the public helped with the implementation of the new autonomous bus service on it, providing feedback on what would make them feel comfortable and confident in travelling. Built on the feedback received, the partners have developed a vision for the new autonomous vehicles, which includes making sure future autonomous bus services still have a member of staff on board.

More than 20 specially trained “Autonomous Bus Professionals” are to be recruited by Stagecoach from across its East Scotland business. When the service goes live, these experienced bus drivers will monitor the autonomous system alongside a captain who will move about the bus, talking to passengers about the service and answering any questions they may have, demonstrating what a future service might feel like when the staff member is able to leave the cab while a computer does the driving.

Sam Greer, regional director for Stagecoach in Scotland, said, “Stagecoach is continuing to look for ways to improve the service it offers to customers, including through major investment in new technology, such as the CAVForth pilot.

“This is a hugely exciting project for Scotland and we are pleased to be starting live testing on roads today. This is a major step forward in our journey to fully launch the UK’s first full-sized autonomous bus service and will provide easy access to a brand-new bus route in the heart of East Scotland.”

Stagecoach employes 24,000 people and a fleet of 8300 buses, coaches and trams that it said are part of the fabric of daily life in England, Scotland and Wales.

“We are delighted to be leading the world’s most complex and ambitious autonomous vehicle program,” said Jim Hutchinson, CEO of Fusion Processing Ltd. “CAVForth will provide a useful service to local people as well as being a great demonstration of Fusion’s automated vehicle technology. The buses are fitted with CAVstar, our automated driving system which combines our own hardware and software to create, safe, full-size buses, operating at SAE Level 4. On road testing is an exciting milestone in the development of autonomous commercial vehicles and we look forward to welcoming passengers onboard in a few month’s time.”

UK-based Fusion Processing was founded in 2012 to design and build systems for the automations of vehicles and technology to improve vehicle safety. Its products have reportedly clocked up over 1.8 million kilometers of service. That includes CAVstar, a control and sensor system, and CycleEye CMS, a mirror replacement system for buses and trucks.


Receive the information you need when you need it through our world-leading magazines, newsletters and daily briefings.

Sign up


The trusted reference and buyer’s guide for 83 years

The original “desktop search engine,” guiding nearly 10,000 users in more than 90 countries it is the primary reference for specifications and details on all the components that go into engine systems.

Visit Now

Becky Schultz Vice President of Content Tel: +1 480 408 9774 E-mail: [email protected]
Julian Buckley Editor Tel: +44 (0) 1892 784088 E-mail: [email protected]
Chad Elmore Managing Editor Tel: +1 262 754 4114 E-mail: [email protected]
Josh Kunz Power Progress Brand Manager Tel: +1 414 379 2672 E-mail: [email protected]
Roberta Prandi Power Progress International Brand Manager Tel: +39 334 6538183 E-mail: [email protected]
Simon Kelly Sales Manager Tel: +44 (0) 1892 786 223 E-mail: [email protected]